Issues Assembling Mourngul

Discussion in 'Warhammer Age of Sigmar' started by AlexZ, Mar 29, 2017.

  1. AlexZ

    AlexZ Member

    Joined:
    Feb 25, 2017
    Messages:
    115
    Likes Received:
    7
    Hi AOS My mourngul finally came in today and I've tried to assemble it using both super glue and plastic glue. But neither have worked at all so far. I can't get the pieces to stick.
    Does anyone have experience assembling forgeworld models? Is there a different type of glue I can use?
     
  2. Terry1

    Terry1 Member

    Joined:
    Mar 4, 2017
    Messages:
    37
    Likes Received:
    1
    Did you wash it thoroughly before assembly? Resin typically has stuff on the outside of it that will cause glue and paint to not stick. Also, use super glue. Plastic glue won't work because it's resin.
     
  3. JimGoodman

    JimGoodman Member

    Joined:
    Feb 25, 2017
    Messages:
    50
    Likes Received:
    1
    Don't use a lot of glue, just a tiny amount, and hold pieces for a minute or more - less is more here. When it seems to hold, don't test the join for an hour... It's still curing and gaining strength. Superglue also has no shear or rotational strength, so don't expect it to hold if you try to pull pieces apart, such as arms attached only at a joint.
     

Share This Page

  • About Us

    WarhammerCommunity.com is the best place to discuss Warhammer.
  • Quick Navigation

    Open the Quick Navigation

  • Like us on Facebook